Horizontal type Big power long stack length pump stator coil middle
(1) Main technical data
|Stack Height||≤600 mm|
|Height of Coil||≤70mm|
|Displacement of Cylinder||50L/min|
|Power supply||380V 50/60Hz 4Kw|
It is applied to deep water pump motor and other various type of
big dimension stator.
(3) Machine mainfunction and characteristic
This machine is suitable for big power stator, long stack length
stator(deep-well pump stator) or other big dimension stator. It is
horizontal type with a auto slider. Stator can be moved by lifting
device. Tooling adopts flexible principles of inner expansion,
outer wrapping and edge forming. It is controlled by PLC. The
parameter can be set in the HMI.
(4) Information needed for final forming machine inquiry:
It will be better if customer could send us detailed drawing
including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Winding drawing
4. Other technical requirement.
If possible, it will better if customer could send us samples.
(5) Appropriate use
If coil dimension and appearance is inaccurate, stop to do
adjustment to avoid of quality accident.
Check and clean up the electrical cabinet once every three months.
The machine should be stopped or power should be off when the
operator is away or do clean and lubricating job.
Do not remove the safety protection device in the process of using.
The dress of operator should meet the safety requirements, stand in
Regularly clean the lubricating tooling and lubricating system. Do
not keep the safety door and oil eye lid to avoid of that foreign
matter like dust,metal scrap get in.
Do not operate machine during its maintenance, stop running machine
and cut off the power.
That other than specified personnel do not operate the machine, and
two people operate the machine at the same time is forbidden.
It is prohibited that operate machine and touch the electrical
parts by wet hands, probably may cause electric shock.
The operator can not leave away when the machine is running, should
keep his eyes on that if any abnormality (abnormal noise, unusual
smell, over heat, vibration) of each parts coming up. Stop and
check the machine immediately if any of above mentioned takes
place, and solve it in time.
It is prohibited that to use the machine beyond its capacity and
After stop using the machine, please do the check an clean up,
please do not use the steam or water or corrosive liquid to clean
The height of the hydraulic oil in the oil tank should keep in same
level with the mark line; the hydraulic oil no is J-HM46# antiwar
Innovational technical team provides perfect complete technical
solutions, to satisfy every customer’s unique requirement;
Specialized after-sale team and engineers offer superior quality,
rapid after-sale service door to door, to solve customer’s all
Wide spreaded domestic after-sale service service network stations
and overseas agencies ensure of powerful after-sale service;
Multi communication methods and full time customer service
personnel dispel customer’s after-sale scruples 24 hours.
(7) Production Line Profile
With good service, professional team and reliable quality, SMT
provide customer with different kinds of AC motor, DC motor,BLDC
motor manufacturing technical consulting service and Turn-key
projecting service, including the motor cost evaluation,
manufacturing know-how, staff training,and complete turn-key